Spare parts for slicers: blades, blade bushings, blade supports, motor flywheels, sharpeners, seals, covers, handles, screws, motors, safety electrical components.
Search for your slicer's model or code to quickly find the right spare part. To help you, send us a photo with the brand, blade diameter, or motor type.
Slicer Spare Parts and Maintenance Guide
Available Components
A wide range of original and compatible spare parts for manual and professional slicers: circular blades of various diameters, blade bushings, motor flywheels, blade supports, sharpeners (incl. double grinding wheel), seals, protective covers, handles, levers / knobs, motors, reducers, screws and bolts, electrical components.
How to choose the right spare part
-
Brand and model of the slicer – often indicated on the label or manual;
-
Blade diameter and type: check the outer diameter, central hole (bushing), and type of teeth if present;
-
Type of flywheel / motor: power, RPM; components must be electrically and mechanically compatible;
-
Sharpener or abrasive stone: some models have built-in sharpeners, others external; compatibility and ease of installation;
-
Safety: blade cover, guards, seals if required, safety switches; everything must comply with current regulations.
Recommended Maintenance
- Clean the blade after each use to avoid rust and residues;
- Sharpen the blade regularly if the sharpener is built-in or use suitable tools;
- Check that the bushing / blade support is secure and free of play;
- Replace damaged seals or guards to prevent leaks or accidental cuts;
- Motor / flywheel check: ensure there are no unusual vibrations or noises after prolonged use;
Common Problems and Quick Solutions
-
Blade not cutting well: dull blade or ineffective sharpener;
-
Blade vibrating or unbalanced: loose bushing or blade supports;
-
Motor struggling or overheating: check if the internal lubricant is dry or if there are obstructions;
-
Broken or missing protective cover: must be replaced to ensure safety;
-
Unstable voltage or power supply: check the cable, switch, fuse, if the slicer is electric.
Quick FAQs
How often to sharpen or replace the blade?
When cutting becomes forced, slices are uneven, or the blade shows visible signs of wear: sharpen or replace it.
How to tell if the blade bushing is the problem?
If the blade vibrates or is unstable, it may be the bushing not holding well; tighten or replace with a compatible part.
Noisy flywheel / motor: what to check?
Lubrication, worn bearings, loose supports are often the cause; replace damaged parts.
Is it safe to wash electrical parts?
No; always disconnect the slicer from the power supply and only wash non-electrical parts; electrical components only with specific products or by professionals.
