Black & Decker

Original and compatible spare parts for Black+Decker tools and small appliances: drills, screwdrivers, grinders, vacuum cleaners, blenders, food processors. HSS bits, diamond discs, motor brushes, HEPA filters, blender blades, containers, cables.

Search by model (e.g. BDH2020FL, BEHT400, BDCMTA03, BXWVE8000) or spare part code (e.g. 90597413, X53413). Questions? Contact us.

Black+Decker Spare Parts Guide (Show content)

Spare Parts for Drills and Screwdrivers

  • HSS Bits: 1–13 mm, 1/4" hex shank, series 90597413.
  • Batteries: Li-Ion 20 V, 1.5Ah, 2Ah, 4Ah, compatible with BDH2020FL, BDCHD18.
  • Chargers: multi-voltage fast charger, original cable, contact plate.
  • Chucks: self-tightening 1–13 mm, quick change, code X53413.

Spare Parts for Grinders

  • Diamond Discs: Ø 115/125 mm, M14, for cutting concrete.
  • Flap Discs: grits 40/60/80, Ø 115 mm.
  • Motor Brushes: kit 2 pcs BDG100, BXSG200.
  • Flange Spline: clamping washers, covers, disc supports.

Spare Parts for Vacuum Cleaners

  • HEPA Filters: series BXWVE8000, wet/dry vacuum BXVC25.
  • Bags: paper bags 5 pcs, code 90598800.
  • Motors: 600W motors, carbon brushes, bearings.
  • Tubes and Nozzles: Ø 32 mm, extensions, combi brushes.

Spare Parts for Blenders and Food Processors

  • Stainless Steel Blades: 4 and 6 points, code BTCMW200.
  • Plastic Containers: 500 ml, 1 L, lids and measuring cups.
  • Sponge Filters: for BTM1000, smoothie pump replacements.
  • Motor Brushes: kit 2 pcs BL2010.

Common Problems and Solutions

  • Drill won't start: replace carbon brushes, check battery/charger.
  • Grinder vibrates: worn discs or damaged flanges → replace discs and flanges.
  • Vacuum cleaner loses suction: change HEPA filter and bag, clean tubes.
  • Food processor won't mix: dull blades → replace stainless steel blade; check lid seals.

Most Serviced Models

Drills: BDH2020FL, BDCHD18, BEHT300. Grinders: BDG100, BXSG200. Vacuum Cleaners: BXWVE8000, BXVC25. Blenders: BTMW200, BTM1000. Model not listed? Write to us.

Recommended Maintenance

  • Check carbon brushes every 50 hours of operation.
  • Replace grinding discs after 10-20 hours of use.
  • Clean vacuum filters monthly.
  • Disassemble blender blades and wash by hand after use.

Black+Decker is a registered trademark; mentioned for identification of spare part compatibility.

Black+Decker Spare Parts FAQ

How do I change the carbon brushes?

Disconnect the tool, open the motor compartment, and replace original or compatible brushes. Check polarity.

Which HEPA filter should I use?

Use the official filter for the model (e.g. BXWVE8000) or a compatible one with the same dimensions and filtration capacity.

Grinding disc won't attach?

Check the flange and tightening screw. Use the included wrench to lock the chuck.

Food processor blades won't turn?

Check the blade gear, seal, and DC motor. Replace the faulty component.

What do common spare parts cost?

Drill bits: 5-10€. HEPA filters: 15-25€. Grinding discs: 8-15€. Blender blades: 12-20€.

494 products