Ice Crusher

Spare parts for ice crushers: ice crusher blades / knives, perforated disks / plates, motor impellers, covers, scrapers, electrical components, cables, pulleys, and original or compatible accessories.

Search for your ice crusher model or code to find the right spare part. If you have any doubts, send us a photo with the brand, blade diameter, or serial number.

Ice Crusher Spare Parts and Maintenance Guide

Available Components

Here you will find original and compatible spare parts for industrial or domestic ice crushers: stainless steel blades / knives, perforated disks / plates, motor impellers, covers, scrapers, pulleys, belts, gaskets, motors, electrical and structural components. Industry sources confirm a wide availability of these spare parts. :contentReference[oaicite:0]{index=0}

How to Choose the Right Part

  1. Brand, model, and serial number: essential for identifying correct diameters and measurements;
  2. Type of blade / knife: diameter, tooth pitch, material (stainless or treated); important that the blade matches the disk/perforation;
  3. Disk or perforated plate: diameter, hole size, position of the central hole;
  4. Impeller, pulley, and transmission: check that the dimensions of the shaft, pulley, and belt are compatible; wear may cause reduced performance;
  5. Cover, scraper, and gaskets: elements that maintain safety, cleanliness, and cutting efficiency.

Recommended Maintenance

  • Clean blades, disk, and scraper after each use to prevent buildup and corrosion;
  • Regularly check that the blade is sharp and that the perforated disk is free of obstructions;
  • Replace pulleys, belts, and impellers if they show wear or slipping;
  • Lubricate moving metal parts if specified by the manufacturer;
  • Check electrical connections, cables, switches, and safety guards to ensure safe operation.

Common Problems and Possible Solutions

  • Ice is not finely crushed: dull blade or clogged perforated disk;
  • Motor struggles or slows down: worn pulley, slipping or faulty belt;
  • Vibrations or unusual noises: uncentered blade, damaged scraper, or incorrect mounting;
  • Cover does not close properly or leaks: damaged or deformed gaskets;
  • Electrical component is unresponsive: check fuses, switches, wiring.

Quick FAQs

When to change the blade / knife?

When you notice that the grinding is coarser than usual or the blade is visibly worn.

Can the perforated disk be replaced independently?

Yes, if the holes match the specifications (central hole diameter, disk thickness), replacement disks can be used as long as they are compatible.

Pulley slips or screams too much: what to do?

Check the belt, the pulley itself, and the shaft mounting: if the belt is worn or too wide/slipping, it needs to be replaced.

3 products