Alfatec

Original and compatible spare parts and accessories for Alfatec vacuum cleaners, wet and dry vacuums, electric brooms: bags, HEPA filters, motors, flexible hoses, nozzles, lids, wands, closure hooks for AD, AC, AB, A-series, Scopatutto, Aquaclean, Aquadry series.

Find the right spare part by entering the model (e.g. AD30, AC200, AB24, A1610, Scopatutto, Aquadry20) or part description. Questions about compatibility? Contact us.

Alfatec spare parts: complete guide for every model (Show content)

Complete range of Alfatec spare parts

  • Wet and dry vacuums: AD30, AD45, AD60, AD80, AC200 - lids, 800W two-stage motors, cartridge filters, flexible hoses, closure hooks.
  • Classic vacuum cleaners: A1215, A1610, A2265, A3380, A3715 - bags, HEPA filters, motors, brushes.
  • AB Series (Scopatutto): AB24, AB25, AB26, AB27, AB28 - specific accessories, wands, angled nozzles.
  • AC Series: AC96, AC97, AC98 - components for traditional and bagged vacuum cleaners.
  • Special models: Aquaclean, Aquadry, Scopatutto Special, Lavatutto - dedicated spare parts for liquid suction.

Most requested spare parts by model

  • AD30/AD45/AD60: bags AL68/ALF101, H13D15.7 cartridge filters, 1.60m flexible hoses, triangular nozzles Ø58mm.
  • A1610/A2265/A3715: HEPA filters, bags 8 pieces NS257/NS250 series, parquet brushes, 1800W motors.
  • Aquaclean/Aquadry: specific bags NS264, waterproof filters, anti-moisture components.
  • Universal accessories: wands Ø58/64mm, angled nozzles, extension hoses, adapters.

Common problems and solutions

  • Loss of suction: replace clogged filters (HEPA or cartridge), check bag seal.
  • Noisy motor or sparks: check motor carbon brushes, replace if worn.
  • Clogged hose: clean or replace flexible hose, check nozzles.
  • Lid won't close: check closure hooks, replace if broken.
  • Does not suction liquids: check specific filters for wet suction (Aquaclean/Aquadry).

Most serviced models

Vacuums: AD30, AD45, AD60, AC200. Vacuum cleaners: A1610, A2265, A3715, AB24. Specials: Scopatutto, Aquadry20, Aquaclean. Model not listed? Write to us with a photo of the label.

Model identification

  • Check the label on the body of the vacuum cleaner or under the canister.
  • Models AD = Wet and Dry Vacuum/Canister, AC = Vacuum Cleaner, AB = Special Series, A + number = Traditional.
  • For universal spare parts, measure the diameter of the connections (58mm or 64mm standard).
  • Take a photo of the part to be replaced for compatibility confirmation.

Recommended maintenance

  • Replace bags when 2/3 full to maintain suction power.
  • Clean HEPA filters every 3-4 uses, replace every 6-12 months.
  • Check hoses and joints for cracks or blockages every 6 months.
  • Lubricate hooks and closure mechanisms annually.

Alfatec is a trademark of their respective owners; mentioned for identification of spare parts compatibility.

Alfatec Spare Parts FAQ

How do I recognize the model of my Alfatec?

Look for the label with the model code on the body of the appliance or under the canister. The codes start with AD (canisters), AC, AB or A + numbers (vacuum cleaners).

How long do Alfatec HEPA filters last?

The original HEPA filters last 6-12 months with normal use. Clean them every 3-4 uses and replace when they no longer clean effectively.

My Alfatec canister is sparking: what should I do?

Turn it off immediately and unplug it. Check the motor carbon brushes - if worn, replace them. If it smells burnt, have it checked by a technician.

Can I use compatible bags instead of the originals?

Yes, quality compatible bags are tested to ensure the same capacity and filtration. Always check the measurements and compatibility code.

How much do the most common Alfatec spare parts cost?

Bags: 8-12€ for a pack of 5-8pcs. HEPA filters: 15-40€. Flexible hoses: 15-35€. Motors: 80-110€ depending on the model.

3 products